Humminbird i-Pilot Link Operation Manual page 93

Cursor locked on a
position on the iTrack.
Tap to Open Go To Menu
Tap to Select
Select and Navigate a Saved iTrack from the Nav Data Tool
Before proceeding, confirm the cursor is not active.
Touch Screen
1. Tap Chart in the status bar. Select Go To.
2. Select Nav Data.
3. Under Lists, select iTracks.
4. Press and hold an iTrack Name.
5. Select Go To.
6. Select a navigation option.
7. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
NOTE: See Propeller Controls for more details about turning the prop on or off and setting the prop speed.
Starting iTrack Navigation from the Go To Menu (ONIX)
OR
Open Go To Menu
Keypad
93
Select
1. Press the GO TO key.
2. Select Nav Data. Press the ENTER key.
3. Under Lists, select iTracks. Press the ENTER key.
4. Select a saved iTrack and press the GO TO key.
5. Select a navigation option and press the ENTER key.
6. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation.
iTrack name
iTrack start point
iTrack end point
Confirm
iTracks