Philips SE450 User Manual page 27

Setting the alarm melody
1. Press .
2. Select Clock & alarm
3. Select the new setting. Press
NOTE: Alarm Volume. The alarm volume is set to the same level as the
ringer volume. If the ringer is off, the alarm volume is set to level 1.
EASY CALL
Easy call allows you to dial out a programmed number by pressing any handset
key (except .)
BACK
Activating easy call
1. Press .
2. Select Advanced set
3. Select On. Press .
OK
4. Enter the easy call number (if it is not set previously). Press
setting is saved.
Setting the easy call number
1. Press .
2. Select Advanced set
3. Enter the easy call number. Press
Deactivating easy call
1. Press BACK during standby. The easy call menu displays.
2. Select Off. Press . The setting is saved.
OK
Extra Features
Alarm tone. Press .
OK
. The setting is saved.
OK
Easy call Mode. Press .
OK
OK
Easy call Number. Press .
OK
. The setting is saved.
OK
- 47 -
Extra Features
KEYPAD LOCK
You can lock the keypad to prevent accidental presses on the handset while you
are carrying it around.
Locking the keypad
1.
NOTE: Calls. You will not be able to make any calls including
emergency calls when the keypad is locked. You can still answer
incoming calls. The keypad will be unlocked during the call, and then it
will be re-locked automatically after you finish the call.
Unlocking the keypad
1.
MISSING HANDSET(S)
. The
1.
2.
Press and hold during standby. The keypad is locked. Keys
locked is displayed.
Press and hold . The keypad is unlocked.
Press on the base station. All the handsets connected to this
base station ring.
Press on the base station again to stop paging. All the
handsets stop ringing OR
Press any key on the handset to stop the paging for that handset.
- 48 -