Philips SE450 User Manual page 23

Setting barred numbers
You can set up to 4 numbers of 1 – 4 digits long. Outgoing calls starting with one
of the 4 programmed numbers will be blocked from dialing out.
1. Press .
2. Select Advanced set
3. Enter the system PIN. Press
4. Select Number Number 1 (2, 3, 4). Press
5. Enter the number you want to block. Press
saved.
AREA CODE MANAGEMENT
This feature only applies to model(s) with area code support.
This feature automatically removes the area code of an incoming call. You can
define an area code (up to 6 digits) you want to remove. The phone number will
be saved in the call log without the area code.
Activating area code removal
1. Press .
2. Select Advanced set
3. Enter the area code. Press
Deactivating area code removal
1. Press .
2. Select Advanced set
3. Use to delete all the digits. Press
BACK
Calling Features
Call barring. Press .
OK
OK .
OK .
. The setting is
OK
Area code. Press .
OK
. The setting is saved.
OK
Area code. Press .
OK
. The setting is saved.
OK
- 39 -
Calling Features
CARRIER CODE
This feature only applies to model(s) with carrier code support.
For some telephone service providers, you may need to add the carrier code
when making a call outside of your local area. The area code feature
automatically helps you decide if the carrier code is needed when you are
returning a call from the incoming call log.
You only have to program the carrier code of your service provider, and your
phone will do the rest for you.
NOTE: Carrier Code. It is a 2 or 3-digit code that represents a service
provider. Consult your service provider to find out its code.
1. Press .
2. Select Advanced set
3. Enter the carrier code number. Press
NOTE: Area Code. Remember to program your local area code in the
area code menu.
AUTO PREFIX
This feature only applies to model(s) with auto prefix support.
The auto prefix feature checks and formats your outgoing call number before it is
dialed out. If the first few digits of the number match the detect number you set in
the menu, they will be replaced by the prefix number you set in the menu.
For example, you set the detect number as 604 and prefix number as 1250.
When you have dialed out a number such as 6043338888, your phone will
change the number to 12503338888 when it dials out.
NOTE: The maximum length of detect digits is 5 digits. The maximum
length of auto prefix number is 10 digits.
Carrier code. Press .
OK
. The setting is saved.
OK
- 40 -