Ring Over Page - Samsung DCS-Compact II Installation Manual

DCS Compact II INSTALLATION MANUAL Chapter 7. Connecting Optional Equipment
After connecting a common bell, you must assign it to a group as a ring
destination by using the code for Common Bell.(See MMC 601)
The basic steps for common bell operation are the following:
a. Wire the loud ringing device to the common bell control contact pair.
b. Program the contacts for continuous or steady operation.
c. Program the hunt group to include the common bell.
d. Assign the trunk to ring the hunt group containing the common bell.
Common bell control can be used with station hunt groups, individual stations
and Universal Answer. Contacts are rated at 24 VDC-1 amp.
WARNING
Do not attempt to connect commercial AC power to these contacts.

7.4 Ring Over Page

When a customer-provided paging system is installed, incoming calls can be
assigned to ring over page(ROP). Program the line or lines to ring a hunt group.
Using MMC 601, assign ROP as a destination in this hunt group. ROP can be
used for day or night operation or both.
7 - 5