8Dli Card; Misc Cards; Misc 1 Card(Without Aa); Misc 2 Card(With Aa) - Samsung DCS-Compact II Installation Manual

DCS Compact II INSTALLATION MANUAL

3.7 8DLI Card

which has 8 digital phone ports. (See Figure 3-3)

3.8 MISC Cards

which has many miscellaneous functions: DTMF receiver(4ch), RS232C, BGM, PAGE,
COMMON PURPOSE RELAY(3ports), AA, MODEM(option) (See Figure 3-3)
3.8.1 MISC 1 Card (Without AA)
3.8.2 MISC 2 Card (With AA)
There are no options on this card. Insert as many 8DLI cards as are needed into
any universal slots 1 to 6. Push firmly in the middle of both card ejectors on each
card to ensure that it is fully inserted into the back plane connector. Optional
Keyset daughter boards cannot be used for Keysets connected to this card.
Two types of MISC card are available. Select the appropriate type for the system
and insert it into the dedicated MISC slot in the Basic KSU.
Insert the MISC 1 card into the Basic KSU slot labelled MISC and push firmly in
the middle of both card ejectors to ensure that it is fully inserted into the back
plane connector.
Insert the MISC 2 card into the Basic KSU slot labelled MISC and push firmly in
the middle of both card ejectors to ensure that it is fully inserted into the back
plane connector.
NOTE
After installation, make sure the back-up Switch(SW1) for AA is in the ON position.
To clear the AA message, use MMC 731 (see DCS Programming Manual).
Chapter 3. Installing Printed Circuit Cards
3 - 5