Off Premise Extension (Opx) - Samsung DCS-Compact II Installation Manual

DCS Compact II INSTALLATION MANUAL

5.3 Off Premise Extension (OPX)

Using one pair twisted #24 AWG or #26 AWG jumper wire, cross-connect any
2SLI port to Long Line or Off Premise Extensions (OPX circuits) (See Figure 5-2)
25 PAIR CABLE WITH FEMALE CONNECTOR TO BASIC P1
LONG LINE
EXTENSION
CONNECT TO ANY
C I R C U I T
ON THE 2 SLI CARD
<FIGURE 5-2> MDF CONNECTIONS OFF PREMISE EXTENSION FROM 2 SLI CARD
Circuits on 2SLI card are specially designed to meet PSTN requirements for Long
Line or OPX use.
These circuits are provided with the same over-current and over-voltage
protection as that of C.O. line circuit.
WARNING
Using Long Line Extensions on a EXP SLI or KDB SLI(8SLI or 6MWSLI) may cause
damage to your equipment.
Chapter 5. Connecting PSTN Circuits
P I N C O L O U R
1 6 B l u e / y e l l o w
4 1 Y e l l o w / b l u e
1 5 S l a t e / b l a c k
4 0 B l a c k / s l a t e
5 - 3
FUNCTION CIRCUIT
SLT TIP
1
SLT RING
SLT TIP
2
SLT RING