Using T9 Mode; Using Abc Mode; Changing Case - Pantech C520 User Manual

Using T9 mode

In the T9 alphabet editor, the word is composed completely as you enter
the text.
1. Press the keys numbered [2] to [9] to input text. For example, press
[4][3][5][5][6] in sequence to input 'hello'. The word you are typing
appears on the display. It may likely change with each key you press.
2. Enter the whole word before editing or deleting any keystrokes.
3. Upon searching a word, input the next text.
4. If the search fails, press [
in. Your phone displays the most commonly used choices first.
5. Continue entering the next word.

Using ABC mode

] key to search which text can be typed
When typing in ABC mode, press the key labeled with the target letter once
for the first letter; press it twice for the second letter, and so on.
Example: To display the letter "C", quickly press the [2] key three times. To
display the letter "K", press the [5] key twice. This method is called Multi-
tab typing.
NOTE: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
press the [Right] scroll key or wait a few seconds for the cursor to move to
the right automatically, and then enter the next letter.
Refer to the table below for more information about the characters
available. The characters vary depending on the text input language.

Changing case

To change the case of the next letter that you type, press the [#] key.
There are three cases:
•
Lowercase ( or
•
Initial capital ( or
)
)
29