Options During A Call - Pantech C520 User Manual

4. Options during a call

To adjust the call volume
To adjust the earpiece volume during a call, do one of the following.
•
To increase the call volume during a call, press the [Up] volume key on
the left side of your phone.
•
To decrease the call volume during a call, press the [Down] volume
key on the left side of your phone.
•
In Standby mode, adjust the ringtone volume and sets vibrate mode
and silent all mode by using the [Up/Down] keys.
To switch your microphone off (Mute) or on (Speak)
You can temporarily switch your phone's microphone off so that the person
you talk to on your phone cannot hear you.
For example, you may wish to say something to another person in the
room but do not want the person calling to hear you.
To switch your phone's microphone off
Press the [Mute] Soft key.
To switch your phone's microphone back on
Press the [Unmute] Soft key.
To put a call on hold, and return to a held call
You can place the current call on hold whenever you want. You can also
make another call while you have a call in progress if your network
supports this service.
To put a call on hold
Press the [Options] Soft key then select [Hold], or press the [
The callers name and icon are grayed while the call is on hold.
To return to a held call
Press the [Options] Soft key then select [Retrieve], or press the [
again.
To make a call while you are on a call
1. Enter the phone number that you want to dial or look it up in Address
Book entry.
2. Press the [ ] key to dial the second call. The first call is
automatically put on hold.
To switch between two calls
Press the [Swap] Soft key. The current call is put on hold and the held call
is reactivated so that you can continue your conversation with the caller.
To end a call
Press the [ ] key in the normal way. To terminate all active calls at the
same time while you are in multi-party call, select [Options] and then
select [End All Calls].
] key.
] key
21