Biostar B350GT3 Bios User Manual page 12

System probe filter
This item controls whether or not the probe filter is enabled. Has no effect on parts where the
probe filter is fuse disabled.
Options: Auto (Default) / Disabled / Enabled
Memory interleaving
This item controls fabric level memory interleaving (AUTO, none, channel, die, socket).
Options: Auto (Default) / None / Channel / Die / Socket
» Note that channel, die, and socket has requirements on memory populations and it will be ignored if
the memory doesn't support the selected option.
Memory interleaving size
This item controls the memory interleaving size. The valid uzlues are AUTO, 256 bytes, 512
bytes, 1 Kbytes or 2Kbytes. This determines the starting address of the interleave (bit 8, 9, 10 or
11).
Options: Auto (Default) / 256 Bytes / 512 Bytes / 1 KB / 2 KB
Cannel interleaving hash
This item controls whether or not the address bits are hashed during channel interleave mode.
This field should not be used unless the interleaving is set to channel and the interleaving size is
256 or 512 bytes.
Options: Auto (Default) / Disabled / Enabled
UMC Common Options
12 | 2. Advanced Menu