Rear Panel - Creative Sound Blaster X-Fi User Manual

Turns EAX on or off when pressed. Turn the dial clockwise or counterclockwise to adjust the amount
7. EAX dial
of EAX effect applied.
Turns X-Fi CMSS-3D on or off when pressed. Turn the dial clockwise or counterclockwise to adjust
X-Fi CMSS-
8. the amount of stereo envelopment between the front and surround channels on a multispeaker system,
3D dial
or the amount of virtualization on a pair of stereo speakers.
X-Fi
Turns the X-Fi Crystalizer effect on or off when pressed. Turn the dial clockwise or counterclockwise
9. Crystalizer
to adjust the amount of X-Fi Crystalizer effect applied.
dial
Master
Controls the combined level of all audio handled through the X-Fi I/O Console. Cuts off all audio when
10. Volume/Mute
pressed.
dial
Infrared
Light
11. Lights up when infrared signals are received from the remote control*.
Emitting
Diode (LED)
Lights up and remains constant when power is supplied to the X-Fi I/O Console. Blinks when the
12. Power LED
Mute function is enabled.
Receives infrared signals from the remote control* and transmits them to your computer.
Infrared
13.
receiver
Rear panel
Jack or
Connector
Auxiliary 2 Line
1.
In/Phono In switch
Auxiliary 2 Line
2.
In/Phono In jacks
When Phono In is selected:
Connect one end of a phono cable to these jacks. Connect the other end to a vinyl record player.
3.
DIN jack
Connect Creative analog speaker systems that have a Volume Control jack (9-pin DIN jack).
For more information, see About the DIN Jack.
Switches between line level or phono sources.
Supports line level or phono sources, depending on which setting is currently selected using the
Auxiliary 2 Line In/Phono In switch.
When Auxiliary 2 Line In is selected:
Connect one end of an RCA cable to these jacks. Connect the other end to the RCA
outputs on line level devices like VCRs, TVs and CD players.
Description