Known Issues - Creative Sound Blaster X-Fi User Manual

Known Issues
When playing MIDI files in Creative MediaSource with X-Fi Synth A or B
settings selected, volume cannot be adjusted through Creative MediaSource.
Adjust the volume control knob in Audio Creation Mode, Entertainment Mode
or Game Mode, if necessary.
There is a "click" sound when I switch modes.
This may occur when you switch modes or restore the mode settings to their
factory default. The sound comes from the relays of your uniquely designed
Sound Blaster X-Fi audio card.
Sound is heard from my center analog speaker only.
This may occur when you are playing a 2D MIDI file.
When playing 2D MIDI content without the "pan" parameter or SoundFont-
compatible MIDI content with zero panning, Sound Blaster X-Fi may channel
sound through your analog center speaker only.
Audio output with older
Speaker
Creative audio cards
2.1 Stereo
5.1 Stereo
7.1 Stereo
Notes
2D MIDI content is equivalent to the standard MIDI format. Use the
3DMIDI Player application to convert your 2D MIDI file to a 3D MIDI
file.
By configuring the MIDI pan parameter of a SoundFont-compatible MIDI
content, you can channel sound through your front left and front right speakers
other than the center speaker.
Audio output with Sound Blaster
X-Fi audio card
Stereo
Front Left / Front Right / Center
Front Left / Front Right / Center