Source Autoswitch Settings; Source Autoswitch; Primary Source Recovery; Primary Source - Samsung DC43H User Manual

Source AutoSwitch Settings

MENU m → System → Source AutoSwitch Settings
Source AutoSwitch Settings

Source AutoSwitch

·

Primary Source Recovery

Primary Source

·
Secondary Source
·
– The displayed image may differ depending on the model.
– The Source AutoSwitch Settings option is only enabled when
Turning on the display with
will automatically search the different video input sources for active video.
Source AutoSwitch
→ ENTER E
When the
The Primary Source
Secondary Source
On
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
Off active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
All
When the
looking for an active video source, returning back to the first video source in the sequence if no video is found.
PC
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
― The
PIP is set to Off.
Primary Source
Specify
Source AutoSwitch
Source AutoSwitch is On, the display video source will automatically be searched for active video.
selection will be activated, if the current video source is not recognized.
selection will become active, if no primary video source is available.
Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
Primary Source Recovery function is disabled if
Primary Source for the automatic input source.
On, and the previous video source selection is not active, the display
Primary Source is set to All.
92