JDS Uniphase hst-3000 User Manual page 70

Chapter 3 Ethernet Testing
Initializing the link for Ethernet testing
48
– If you turned auto-negotiation OFF, the HST immediately
transmits idles over the circuit.
To initialize an Ethernet link
1 If you haven't already done so, launch your application
(see "Launching an application" on page
select your test (see the appropriate procedure below):
– "Selecting a layer 2 test" on page 46
– "Selecting a layer 3 IP test" on page 120
– "Selecting a layer 4 TCP/UDP test" on page 165
– "Selecting a multiple streams test" on page 182
2 Press the Configure navigation key.
A configuration menu appears.
3 Use the left and right arrow keys to go to the Link Init
configuration menu.
1G optical applications.
Figure 19 Link Init configuration menu
HST-3000 Ethernet Testing User's Guide
Figure 19 illustrates the settings for
28), and then