"Level" Installation - Siemens SITRANS P500 Compact Operating Instructions

Figure 3-1 Fastening the transmitter on the mounting bracket with horizontal differential pressure lines
Figure 3-2 Fastening the transmitter on the mounting bracket with vertical differential pressure lines
3.4

"Level" installation

3.4.1 Installation for level
Note
Seals are required for the installation. The seals must be compatible with the medium to be measured.
Seals are not included in the delivery.
Procedure
To install the transmitter for level, proceed as follows:
1. Attach the seal to the container's mating flange.
Ensure that the seal is centrically positioned and that it does not restrict the movement of the flange's seal diaphragm in
any way as otherwise the tightness of the process connection is not guaranteed.
2. Screw on the transmitter's flange.
3. Observe the installation position.
SITRANS P500 with HART
A5E02307341-03, 04/2013
13