Operation - Chamberlain 940EV User Manual

Wireless keyless entry
Hide thumbs Also See for 940EV:
Table of Contents

Advertisement

Available languages

Available languages

Operation

The garage door opener activates when the
pressed. The keypad will blink for 15 seconds, during that time the
ENTER
button can be used to stop, start or reverse the door.
If the wrong number is accidentally pressed, press the
the
ENTER
button. The Keyless Entry will transmit only the last four
digits that were pressed before the ENTER button.
ONE BUTTON CLOSE
The Keyless Entry has a feature
that allows the door to be closed
using the ENTER button instead
of a PIN.
NOTE: This feature is not
available on garage door
openers manufactured prior to
2006 or an external receiver.
To deactivate the one button close feature:
Press and hold the 1 and 9 buttons for 10 seconds.
The keypad will blink four times when the one
button close feature is deactivated.
To activate the one button close feature:
Press and hold the 1 and 9 buttons for 10 seconds.
The keypad will blink twice when the one button
close feature is activated.
PIN
and
ENTER
button are
correct PIN
then
BATTERY
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
Replace the battery when the keypad becomes dim or does not light
after a button is pressed.
Dispose of old battery properly.
9V Battery
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

940ev-p2940evc940evc-p2

Table of Contents