Flash Exposure Control
M manual flash mode power control
1. Press the Group Selection button, the group letter blinks.
2. Rotate the Operation Dial to increase or decrease the flash power of the group selected.
The setting of M mode on Air 10s starts from 1/256 (minimum) to 1/1 (Full), and
controlled by 1/3 step intervals. The value digi displayed next to the group
only shows the integer step value ( * ) .
M mode
3. When the M mode setting is completed, press the group selection button again.
(*) The integer step values of Nissin Air 10s are
1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 and 1/256
CAUTIONS
CAUTIONS
TTL auto flash exposure mode of Nissin Air 10s (Canon version) only supports
If you do not press any group selection button which means all group letters in the
Canon camera. Other brand cameras or camera models without our compatibility
display do not blink,
test does not support.
groups. For example, A: 1/256, B: 1/8 + 0.6EV, C: 1/4, D: 1/2, do not select any
group then rotate the Operation Dial clockwise with 2 intervals, it becomes
A: 1/256 + 0.6EV , B: 1/4 + 0.3EV, C: 1/4 + 0.6EV, D: 1/2 + 0.6EV.
rotate the Operation Dial to increase/ decrease the power of all
17