Jumper Setup - ASROCK EP2C612D16FM2 User Manual

2.6 Jumper Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 29)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 20)
PMBUS Mode Jumper
(3-pin PMBUS_SEL_DAT1)
(see p.6, No. 49)
(3-pin PMBUS_SEL_CLK1)
(see p.6, No. 50)
(3-pin PMBUS_SEL_ALT1)
(see p.6, No. 48)
NCSI Mode Jumper
(3-pin NCSI_SEL1)
(see p.6, No. 45)
Normal Mode (Default)
CPU PECI connect to PCH
PMBus connected to BMC
(Default)
NCSI is set to onboard
LAN1 (Default)
EP2C612D16FM2
ME Recovery Mode
CPU PECI connect to BMC
(Default)
PMBus connected to PCH
NCSI is set to Mezzanine
Card
23