Dell Latitude D500 Installing And Configuring page 18

Connect the antenna cables to the Mini PCI
3
card.
To complete the Mini PCI card installation, you need
to replace the keyboard:
Connect the keyboard connector to the interface
1
connector on the system board.
Insert the five securing tabs on the keyboard into
2
their respective slots in the palm rest.
Replace the two screws at the top of the
3
keyboard.
Replace the center control cover and snap it
4
down so that it is flush with the palm rest.
Attaching the Regulatory Label
NOTICE: You must affix the provided label because it
is a regulatory requirement. Failure to do so may void
your authority to operate the equipment.
NOTE: If your kit came with a SIRIM label, attach
the label as shown
Close the display and turn the computer upside
1
down on a clean, flat work surface.
Remove the adhesive cover from the back of the
2
regulatory label and attach the label.
22
Installing and Configuring the Mini PCI Card
.