Omron CS1W-EIP21 Operation Manual page 59

Checking Bandwidth Usage and Adjusting the Packet Interval (RPI)
36
c. In the Register Device List, select the connection for which you want
to change the packet interval (RPI), and click the Edit Button.
d. The device's Edit Connections Dialog Box will be displayed. Input a
new packet interval (RPI) value, and click the OK Button.
4. If the packet interval (RPI) cannot be adjusted to the desired value by the
three preceding methods, evaluate the network configuration itself and
consider taking the following steps.
• Reduce the number of nodes and number of connections.
Section 2-3