Table of Contents
Advertisement
Getting started
When the battery is weak and only a few minutes
of talk time remain, a warning tone sounds and a
"Low Battery! Recharge Soon" message repeats at
regular intervals on the display. In this case, the
phone turns off the backlight of the display to
conserve battery power.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
18
Switching on or off the phone
1. Open the phone.
2. Press and hold
until the power-on image
displays to switch on the phone.
The service light on the phone flashes and an
alert sounds. When the system locates
services, the greeting message displays along
with the time and date. You can now place and
receive calls.
If the phone is out of service, the No Service
icon (
) appears on the display. In this case,
you cannot place and receive calls. You can try
again later when service is available.
Note: You can change the display language in
the Language menu (Menu 9-5-5). For
further details, see page 112.
3. When you wish to switch off the phone, press
and hold
for more than two seconds until
the power-off image displays.
WARNING!
Do not switch on the phone when mobile phone
use is prohibited or when it may cause
interference or danger.
Note: As with any other radio-transmitting device,
do not touch the antenna unnecessarily when
the phone is switched on. Contact with the
antenna affects the call quality and may cause
the phone to operate at a higher power level
than otherwise needed.
Getting started
19
Advertisement
Table of Contents
