Table of Contents
Advertisement
For example, "[F]+[UP]" indicates that you should press thè [F] key,
followed by thè 1 3 key within four seconda. Ali key functions are
described in detail in thè OPERATION section, and summarized in thè
Operator's Quick Reference Charts.
(8)
LCD (Liquid Crystal Display)
The display shows thè selected operating conditions as indicated in
thè following diagram. The 1-GHz frequency digit is not displayed.
Keypad Alt
Functions Active-
Memory Channel No.~
-Tone Squelch ENCode/DECode
Keypad Locked
(9) BUSY/ON AIR Indicator Lamp
Q 1377*1 Préa B D^-Repeater Shift Direction
^7 O O O O
O u U . U U U b ~ O p e r a t i n g (or Tone) Frequency
-S-Meter or Power Output Meter
arnsì
Tnis LEO indicator glows green when thè noise squelch is open
during reception, and red when transmitting.
- 6 -
REAR PANEL
(1)
EXT SP (External Speaker) Jack
This 2-contact mini phone jack accepts a 4- to 16-ohm external speaker
such as thè SP-55. When a plug is inserted into this jack thè internai
speaker is disabled.
(2)
13.8VDC Cable Pigtail
This is thè power supply connection for thè transceiver. Use thè fused
DC Cable supplied with thè transceiver to make connection between
this pigtail and thè car battery or other DC power supply capable of
at least 6 Amperes (continuous). Make certain that thè red lead connects
to thè positive side of thè supply.
(3) ANT (Antenna) Jack
Connect a 23cm antenna to this type-N socket using 50-ohm coaxial
cable and a type-N plug. Make sure thè antenna is designed specifically
for use at thè operating frequency.
- 7 -
Advertisement
Table of Contents
