Note : This set can be disassemble according to the following sequence.
Set
Panel (rear)
assy
Note : Follow the disassembly procedure in the numerical order given.
3-1. PANEL (REAR) ASSY
• When installing, position the knobs (V•O•R, MIC SENS) and the switches.
3 screw (M1.4x5.0), locking
3-2. PANEL (LID) ASSY
b
6 panel (lid) assy
SECTION 3
DISASSEMBLY
Panel (lid)
MD block
assy
assy
a
Main board,
complete
1 screws (B1.7x18) (G), tapping
knob (MIC SENS)
knob (V • O • R)
2 screw (B1.7x18) (G), tapping
switches
1 knob (EJECT)
2 CN102
3 screws (M1.4),
toothed lock
– 5 –
Frame
Mode motor
block
4 panel (rear) assy
5 lever (C holder) assy
4 screw