General Operation; Turn The Unit On/Off; Basic Play; Last Play Memory - Pyle PLD142 Owner's Manual

GENERAL OPERATION

TURNING THE UNIT ON/OFF
Turning on the Player
After all connections are completed
correctly, Press power button on the
front panel to turn on the power. When
the unit is on, it will search the disc
automatically. If there is a disc in the disc
slot, the unit will start playback
automatically.
Turning off the Player
When the power is on press
button on the front panel or on the
remote control to turn off the power.
AV output Type Selection
Slide AV OUTPUT TYPE switch on the
back of the unit left or right to select A or
B.
When the switch is slid to A side, the AV
OUTPUT 1 and AV OUTPUT 2 are both
under the control of the MODE button on
the remote control or on the front panel
of the unit, i.e. the signal output may be
any one of the DVD, AV INPUT 1 and AV
INPUT 2 signal source.
When the switch is slid to B side, the AV
OUTPUT 1 just outputs the AV INPUT 1
signal and it doesn't under the control of
the MODE button or SOURCE button.
But the signal output from the AV OUTPUT
2 is under the control of the MODE button
on the remote control or on the front panel
of the unit.
Remote Sensor (IR)
Point the remote handset to the remote
sensor IR on the DVD unit. Receive the
signal from remote handset.
Loading a Disc
Insert the disc into the disc slot with the
printed side facing up, the player will play
the disc automatically.
Removing a Disc
When the disc stops playing, press
button on the front panel to eject the disc.

BASIC PLAY

Stopping Playback
- Shortly press button on the front panel
or on the remote control one time to
pre-stop the unit playback. When
button on the front panel or on the
remote control is pressed, normal
playback will continue.
- Press
playback and go back to the DVD
LOGO.
Pausing Play/Step Play
Pressing
remote control during playback will stop
playback temporarily. To return to normal
playback, press
or
If you play a DVD/VCD/SVCD, press on
power
the remote control again to stop at the
next picture (step function). If you play a
CD/MP3/Picture CD, pressing
remote control again is ineffective.
Rapid Forward / Rapid Reverse
Press
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follows.
DVD/VCD/CD/MP3:
Normal Playback
Slow Motion Playback (For DVD Only)
Press
Each time the button is pressed, the
speed of slow forward/reverse changes
according to the disc as follows.
DVD:
Normal Playback
In slow motion state, press on the remote
control to recover normal playback.
Skipping Track
Press
control or on the front panel during
playback.
Press
press
Note:
eject
For some VCD2.0 discs (PBC-playback
control),
unavailable.
Volume Level Adjustment
Rotating VOL+/- button on the DVD unit
or VOLUME +/- on the remote control to
increase or decrease the volume level.
/
11
button twice to stop the
on the front panel or on the
on the remote control
on the front panel.
& during playback.
X2 X4
/ during play.
SF1/2
SF1/7
/ buttons on the remote
to skip to the next track, and
to skip to the previous track.
/ buttons may be
on the
X8 X20
SF1/3 SF1/4
SF1/6 SF1/5