Table of Contents
Advertisement
4.2
Manager Programming
Budget Management on ISDN Port
Description
Selection
Default
Programming
Conditions
Feature References
Assigns the charge limitation of a call on the ISDN extension port
basis.
• Port number: KX-TD816—01 through 06,
KX-TD1232—01 through 12,
(
=all ports)
• Charge limitation (Charge): 0 through 59999
All ports – 0
1.
Enter 014.
Display: ISDN Charge Lim.
2.
Press NEXT.
Display: Port NO?–>
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #01:
4.
Enter a charge limitation.
To delete the charge limitation, press CLEAR.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7.
Repeat steps 4 through 6.
8.
Press END.
• If the charge limitation is set "0," no restriction is applied.
• To assign all port to one selection, press the
In this case, the display shows the contents programmed for a first port.
• Port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• The displayed currency denomination can be programmed by [121]
Assignment of Denomination.
Section 3, Features,
Budget management — in this manual
Charge Fee Reference — in this manual
014
0
key at step 3.
19
Advertisement
Table of Contents
