Fellowes Powershred 450M User Manual page 2

A.
B.
C.
D.
E.
F.
CAPABILITIES
Will shred: Paper, plastic credit cards, CD/DVDs and staples
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above
Paper shred size:
Micro-Cut .................................................................... 5/64 in. x 1/2 in. (2mm x 12mm)
Card/CD shred size:
Strip-Cut .....................................................................................................1.5 in. (40mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
manual. Read the entire instruction manual before operating shredders.
to off or unplug when not in use.
openings. If object enters top opening, switch to Reverse (
Vapors from propellants and petroleum based lubricants may combust causing
serious injury
Do not place near or over heat source or water.
2
G.
H.
KEY
A. CD/card entry
B. See safety instructions
C. Paper entry
D. Pull-out bin
E. Window
F. Casters
G. ON/OFF switch
1. OFF
2. ON
Maximum:
Sheets per pass ............................................................................................................. 9*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width .............................................................................8-11/16 in. (220mm)
CD entry width .................................................................................4-13/16 in. (122mm)
* 8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 2.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Maximum recommended daily usage rates:
300 sheets per day; 25 credit cards; 10 CDs.
) to back out object.
H. Control Panel and LEDs
1. Overheat (red)
2. Remove paper (yellow)
3. ON/OFF and Bin open (green)
4. Reverse
5. Auto
6. Forward
9 sheets per pass to avoid jams.
action will stop shredder immediately.
transformers, or extension cords should not be used with this product.
ENGLISH
Model 450M
(I) position to