Figure 13: Wireless Network Properties Dialog Box - 3Com WL-549 User Manual

2. Select Add under the Preferred networks selection box.
The Wireless Network Properties dialog box appears as shown in figure 15.

Figure 13: Wireless Network Properties dialog box

3. Uncheck the box "The key is provided for me automatically".
4. Verify that the Network Authentication is set to WPA-PSK.
5. Verify that the Data Encryption is set to TKIP or AES.
6. Input the Network Key of your Access Point, Wireless Broadband Router
or Wireless Router.
Note:
A 8 – 63 character alphanumeric key-phrase is necessary when using the
WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII notation
common with WEP keys. Your WPA/WPA2 enabled device should already have a
8 – 63 character alphanumeric key-phrase. Consult the information asked for in
Section 3.2.
7. Input the Network Key a second time into the "Confirm network key" box.
8. Select OK.
You are returned to the Wireless Network Connection Properties dialog box and are able
to verify your connection.
3Com Wireless 11g PCI Adapter
17