Table of Contents
Advertisement
3. Select the General tab in the Wireless Network Connection Properties dialog box.
4. Highlight Internet Protocol (TCP/IP) in the "This connection uses the following
items:" selection box.
5. Select Properties.
The Internet Protocol (TCP/IP) Properties dialog box appears with the General tab
displayed.
Figure 9: Internet Protocol (TCP/IP) Properties dialog box
6. Verify that the following choices are selected:
•
Obtain an IP address automatically
•
Obtain DNS server address automatically
Note: Obtaining an IP address automatically is recommended. If static IP address
settings are preferred, refer to your own wireless network settings.
7. Select OK.
You are returned to the Wireless Network Connection Properties dialog box.
For instructions on how to set WEP security refer to Section 3.3.1. For instructions on how
to set WPA/WPA2 security refer to Section 3.3.2.
3Com Wireless 11g PCI Adapter
13
Advertisement
Table of Contents
