Positioning The Seat; Positioning The Steering Wheel - Toro 74784 Operator's Manual

The operating-in-reverse light should turn off.
Move the traction pedal to the
16. If not engaged, push the SmarkPark switch to
the position and lightly tap the traction pedal
ON
in the either the
FORWARD
The brake should disengage and the brake light
should turn off.
Note:
Tap the pedal, do not fully engage the
pedal as that causes the brake system to bind
and not release.
17. With the brake released, engage the traction
pedal slightly and rise from the seat. The engine
should shut off.
18. Return to the seat and turn the ignition key to the
position. After several seconds, the brake
OFF
system should engage.
Note:
With the key in the
brake light does not illuminate.

Positioning the Seat

Figure 10
position.
NEUTRAL
or position.
REVERSE
position, the
OFF
g027249
Positioning the Steering
Wheel
The steering wheel has 3 positions for operation and
1 full-up position. Use the full-up position for stepping
on and off the machine and getting out of the seat.
When operating the machine, position the steering
wheel where you have the best control of the machine
and are most comfortable.
1. Press your foot onto the steering-column release
lever.
2. Position the steering wheel to the desired
position (Figure
16
11).
Figure 11
g027751