Table of Contents
Advertisement
Accessories
Installing the Vehicular Battery Charger
Figure 3. Installing the Vehicular Battery Charger
1. Attach the Vehicular Battery Charger's accessory connector to the
bottom of the i1000-A. While holding the i1000-A with its front
toward you, insert the accessory connector (with the Motorola
logo facing you) into the slot on the bottom of the i1000-A until
you hear a click.
2. Remove the vehicle's cigarette lighter plug from the cigarette
lighter receptacle.
3. Plug the Vehicular Battery Charger's cigarette lighter adapter into
the cigarette lighter receptacle. The power light (green LED) will
come on.
4. The i1000-A may be turned off, turned on, or used.
Removing the Vehicular Battery Charger
1. Unplug the Vehicular Battery Charger's cigarette lighter adapter
from the vehicle's cigarette lighter receptacle.
2. Press the latches on the accessory connector.
3. Pull the accessory connector from the bottom of the i1000-A.
Vehicular Battery Charger Operating Specifications
Operating voltage range: 10.8 - 33.0 Vdc.
Operating temperature range: -30°C to +60°C
80
Cigarette Lighter
Adapter
Accessory
Connector
Accessory
D R A F T
Advertisement
Table of Contents
