Pioneer DVR-LX60D Operating Instructions Manual page 46

Recording
06
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the G-Code
system by selecting Details from the
G-Code# setting screen.
ENTER
1 Select 'Details' from the
G-Code# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2 Check and edit the fields as
necessary.
See Setting timer programmes on page 33 for
more on this.
ENTER
3 Select 'Store Programme' to
save the timer programme and exit.
Editing a timer programme
You can change any of the settings in a timer
programme before the recording is due to
start. Even if a programme is currently being
recorded, you can program a new end time
or edit its extend time parameter.
TIMER
REC
1 Press to display the Timer
Programme View screen.
You can also access the Timer Programme
View screen from the Home Menu (press
HOME MENU, select Timer Recording,
then Timer Recording).
This screen shows all the timer programmes
currently set.
Timer Programme View
Manhattan Open Tennis
SUN 25/3
World Journey
MON 26/3
Flower
MON – FRI 13:30 – 14:00
46
En
SUN 25/3 15:00
Tmr Pgms 3/32
OK
18:00 – 19:00 Pr 4
OK
19:30 – 21:00 Pr 6
Until 20/4
Pr 8
New Input
HDD Remain 59h59m(SP)
DVD Remain
1h59m(SP)
• Each row is for one timer recording
programme, with the date and time
information, channel, recording mode,
DVD or HDD and recording status.
• The amount of free space available on
the HDD and the currently loaded
recordable DVD is shown towards the
bottom of the screen.
• In the upper-right corner, the number of
timer programmes already set is shown
next to Tmr Pgms.
• If there are more than five timer
programmes already set, press
 NEXT to switch page (go back using
the  PREV button).
• You can also delete a timer programme
before it's started (before the recorder
enters timer recording standby) by
highlighting it and pressing CLEAR. See
also Deleting a timer programme on
page 47.
2 Highlight the timer
programme you want to change.
If you want to set a new timer programme,
select 'New Input' and skip to step 4.
ENTER
Press  then select 'Modify'
3
from the command menu panel.
Alternatively, press ENTER.
The Timer Programme Set screen appears
from which you can edit the settings.
ENTER
4 Enter the timer recording
settings.
Use the / buttons to select a field; use
the / buttons to change the value. For
more information on the options available at
the Timer Programme Set screen, See
Setting timer programmes on page 33.