Pioneer DVR-LX60D Operating Instructions Manual page 34

Using the digital electronic programme guide
05
3 Enter the timer recording settings.
Use the / buttons to select a field; use
the / buttons to change the value.
Timer Programme Set
Manhattan Open Tennis
CH Date
D.TV003 SUN 1/4
Detailed Settings
Record To
Recording Mode
Auto Replace Rec.
Genre
• CH – Choose a channel (Pr 1 to Pr 99 for
analog channels and available digital
channels (excluding skip channels)), or
one of the external inputs from which to
record.
• Date – Choose a date up to one month in
advance, or select a daily or weekly
programme.
• Start – Set the recording start time.
• Stop – Set the recording end time
(maximum length of a timer recording is
24 hours).
• Extend – Extend the end time of the
timer recording (select Off, 30, 60, 90 or
120 mins.)
4 If you want to change the recording
mode, recording destination, etc., select
'Set Detailed'.
In this area you can set:
Record to – Select HDD for hard disk
recording or DVD for DVD recording
Note
1 • For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 114) is set to On, the recorder will
adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even
on MN1 recording quality (MN4 for DVD+R/+RW) then the Recovery Recording feature will automatically
make the recording to the HDD instead.
• If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.
• If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start,
the new timer recording will not replace the old one. However, the next time the timer recording starts, both of
the older two programmes will be erased.
2 This mode maximizes the recording quality to fit on to a single DVD disc. Can also be used when recording to
34
HDD.
En
Start Stop Extend
18:00 19:00 Off
Store Programme
Enter Details
HDD
XP
Set Detailed
------
Set Title Name
No Category
Cancel
1
Recording Mode – Select from AUTO
SP, LP, EP, SLP, SEP (See Setting the picture
quality/recording time on page 40). If Manual
Recording is on, then you can also select the
LPCM setting, XP+ or MN (press ENTER
then use the / buttons to select the
level).
Auto Replace Rec. – Automatically erases
the previous daily or weekly recording when
the next one is recorded.
Genre – Select a record genre (for HDD
recording only).
5 After entering all the timer recording
information, highlight 'Store
Programme' and press ENTER.
A red clock icon appears for the programme.
6 Press to exit the Digital EPG
GUIDE
screen.
Tip
• To enter a title name for the timer
recording in advance, select Set Title
Name and follow the on-screen display.
.
2
, XP,