Contents
Connections
Selecting the speakers for audio output
1
Use SPEAKERS A/B on the main unit to select the
speaker system to be used for playback.
The indicator of the selected speakers lights.
0 When using headphones, press SPEAKERS A/B to turn off all of the indicators and
turn audio output from the speaker terminals off.
Selecting the input source
1
Use INPUT df to select the input source to be played
back.
The indicator of the selected input source lights in blue.
0 You can also select the input source by turning INPUT SELECTOR on the main
unit.
Front panel
Rear panel
Playback
Settings
Adjusting the volume
1
0 You can also adjust the volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
0 To cancel mute, press MUTE : again.
Remote control
27
unit
Tips
Use VOLUME df to adjust the volume.
Press MUTE :.
The indicator of the currently set input source lights in red.
Index
Appendix