Operations Cannot Be Performed Through The Remote Control Unit - Marantz PM8006 Owner's Manual

Contents Connections

Operations cannot be performed through the remote control unit

Operations cannot be performed through the remote control unit.
Batteries are worn out. Replace with new batteries. (v p. 5)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 5)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 5)
0
The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
0
remote control sensor will not be exposed to strong light.
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
0
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
The remote control code of the volume buttons on the remote control (VOLUME df and MUTE :) is set to the mode for operating a Marantz Network
0
CD player. If the volume of this unit cannot be adjusted using the remote control, press and hold ENTER and the number 2 button together for 5
seconds or more to change the remote control code to AMP operation mode.
Front panel Rear panel
Playback Settings
Remote control 37
unit
Tips
Index
Appendix