Selecting The Speakers For Audio Output - Marantz PM6006 Owner's Manual

Contents Connections

Selecting the speakers for audio output

1
Press SPEAKERS A/B to select the speaker system to
be used for playback.
The indicator of the selected speakers lights.
0 When using headphones, press SPEAKERS A/B to turn off all of the indicators and
turn audio output from the speaker terminals off.
Selecting the input source
1
Press the input source select button to be played back.
The indicator of the selected input source lights.
0 You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
0 You can also adjust the master volume by turning VOLUME on the main unit.
Front panel Rear panel
Playback Settings
Turning off the sound temporarily
(Muting)
1
0 To cancel mute, press MUTE : again.
Adjusting the tone
1
2
0 You can also press SOURCE DIRECT on the main unit to turn off source direct
mode.
27
Remote control
unit
Tips
Press MUTE :.
The indicator of the currently set input source flashes in red.
Press SOURCE DIRECT to turn off source direct mode.
The SOURCE DIRECT indicator turns off.
Turn the BASS, TREBLE and BALANCE on this unit to
adjust the tone.
Index
Appendix