Preparing The Remote Control - Pyle View Series PLD179U Instruction Manual

Remote control:
9
15
28
22
29
30
31
32
16
17
33
20
14

Preparing The Remote Control

When using the Remote Control
* Before you using the remote control,
please take the transparent insulator
slice off the bottom of remote control.
* Point the remote control at the remote
sensor (11) within 2 meters.
* It may not be possible to operate the
remote control if the remote control
sensor is exposed to direct sunlight.
* Operation angle: about ±30°in each the
direction of the front of the remote
sensor.
* The remote control is a small,
lightweight precision device. To avoid
damage, short battery life, operational
errors and poor response, observe the
following.
- Do not subject the remote control to
excessive shock.
6
- Do not put in a trouser pocket.
- Keep away from food, moisture and
dirt.
- Do not place in direct sunshine.
6
Battery replacement
41
Battery type: a button cell lithium battery
40
(CR2025 3V)
19
1. Opening the battery case
39
Slide out the battery cover while firmly
pressing in the direction of the arrow.
38
37
36
35
25
24
34
2. Replacing the battery
23
Put the battery in the case with the (+)
indication upward as shown in the
13
illustration.
3. Closing the cover
Slide the cover as illustrated until a click
is head.