Preparing The Remote Control; Loading/Ejecting A Disc; Loading A Disc; Ejecting A Disc - Pyle PLRDVD7 Owner's Manual

REMOTE CONTROL

Preparing the Remote Control

Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About ± 30 degree in
each the direction of the front of the IR
mark.

LOADING/EJECTING A DISC

Loading a Disc

When you have installed the unit and all
connections have completed, you can
load a disc as follows:
1. Turn the ignition on the the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2) (see below).
4. The player will start playback
automatically.
1

Ejecting a Disc

Press (EJECT) button (3) to eject the
disc.
2 3
13