Cd-Rom Drive; Intel ® Processor Serial Number; Mouse With Scroll Function(Wheel); Restartup After Installing Landdesk - Fujitsu DESKPOWER 5000 Series User Manual

CD-ROM drive

○ ○ ○ ○ ○ ○ ○
If a CD-ROM cleaning disk sold separately is used for cleaning, the lens may not be clean. Do
not use a CD-ROM cleaning disk.
®
Intel processor serial number
○ ○ ○ ○ ○ ○ ○
®
Each Intel Pentium
processor serial number can be used for information management, resource management,
and security improvement on the web.
The user can read the processor serial number using software. The software read function can
be enabled or disabled using the BIOS Setup. The PC is shipped with this function disabled.
To enabled the function, set "Processor serial number" in the main menu of the BIOS Setup to
"Enable."

Mouse with scroll function(wheel)

○ ○ ○ ○ ○ ○ ○
When a USB keyboard and a mouse (PS/2) with the scroll function are used under Windows
98/2000, connect the mouse connector on the USB keyboard. If the mouse is connected to the
mouse connector on the PC, the mouse may not operate when Windows 98 is started in safe
Mode.

Restartup after installing LANDDesk

(Windows 95/98/NT model)

○ ○ ○ ○ ○ ○ ○
Restart the PC after a while on the [Setup Completion] screen that is displayed when
installation is completed. Otherwise, required modules may not be installed. Also, after restart
of the PC is completed, do not turn the power on, restart the PC, or display the [Alert on LAN
setting] screen of Client Manager for a while (a delay of at least five minutes is recommended).
When restart of the PC is completed, Alert On LAN-EEPROM is initialized by Client Manager.
Restarting or turning off the PC during initializing may cause incorrect operation of the Alert On
LAN function. In such case, uninstall Client Manager in [Add and Delete Applications] of the
Control Panel and then reinstall it.
®
III processor contains a serial number that can be read electrically. The
®

Client manager 6.0

111