Garmin GNS 530 Manual page 28

DA 40 AFM
IFR PROCEDURES
Once the direct-to or flight plan is confirmed, the whole range of instrument
procedures is available to you. Departures (SIDs), arrivals (STARs), non-precision
and precision approaches are stored within the NavData card and available using the
PROC (procedures) key.
To display the procedures page, press PROC.
The steps required to select and activate an approach, departure or arrival are
identical. In this Supplement, examples of the steps required to select an approach
are shown, but keep in mind the same process also applies to departures and arrivals.
To select an approach, departure or arrival:
1. Rotate the large right knob (13) to highlight the 'Select Approach?'
option (or 'Select Arrival?' / 'Select Departure?') from the procedures
page.
2. Press ENT to display a list of available procedures for the arrival
(when using approach or STARs) or departure (when using SIDs)
airport.
3. Rotate the small right knob (12) to select the desired procedure and
press ENT.
4. For approaches, a window appears to select the desired initial
approach fix (IAF) or a 'vectors' option to select just the final course
segment of the approach. Rotate the small right knob (12) to select
the desired option and press ENT. (The 'vectors' option extends the
final inbound course beyond the final approach fix, allowing you to
intercept the final course segment beyond its normal limits.)
Doc. # 6.01.01-E Rev. 0 01 Dec 2001
Supplement A21
GNS 530
Page 9 - A21 - 27