Garmin GNS 530 Manual page 19

DA 40 AFM
To enter fuel capacity, fuel on board and fuel flow figures:
1. Rotate the large right knob (13) to select the 'CAP'-, 'FOB'- or 'FF'-
field
2. Rotate the small (12) and large (13) right knobs to enter the desired
figure, then press ENT.
The instrument panel self-test page includes selections to set fuel on board ('FOB') to
full capacity and access the checklist page. This allows you to quickly set fuel to full
limits and display any checklists you have entered, such as start up or takeoff
checklists.
To set fuel on board to full:
1. Rotate the large right knob (13) to highlight 'Set Full Fuel?'.
2. Press ENT and verify that fuel on board ('FOB') now matches the fuel
capacity ('CAP') figure. Fuel on board will now be reduced, over time,
based on the fuel flow ('FF') figure.
To view the checklists page:
1. Rotate the large right knob (13) to highlight 'Go To Checklists?' and
press ENT.
2. Rotate the large right knob (13) to select the desired checklist, then
follow the steps on page 142 of the GNS 530 Pilot´s Guide to execute
each step in the selected checklist.
Doc. # 6.01.01-E Rev. 0 01 Dec 2001
Supplement A21
GNS 530
Page 9 - A21 - 18