Mute Button - Pyle PLCD80M Instruction Manual

BASIC OPERATION
4.5.TRACK UP /DOWN BUTTONS
A.During RADIO mode, press and hold
auto search channel. Then press
B.During CD mode, Press
previoustrack.Press and hold
or fast reverse. Releasing the button to stop fast playing
C.IN MP3 MODE:Press the
track under normal MP3 playback.
6. MODE BUTTON
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation.
7. LUD
When reduce volume to half level,press it to enhance the bass effect.
8.ST BUTTON
Press ST button to stereo reception for radio stations.
9. OPEN /EJECT
Slide it down then you can insert the CD disc into the CD compartment or eject the disc.
10-11-12-13-14-15. PRESET MEMORY BUTTONS
A. To memorize the current frequency, press any one of the six preset Buttons hold for
more than 2 seconds.
B. To recall the preset memory, press one of the preset buttons [1-6].
C. In CDP mode, press 1TOP button to pause CDP playing, press it again to resume CDP
playing. Long press 1 TOP button to select the first track/chapter to play.
D. In CDP mode, press 2INT button to play the first 10 seconds part of each song, press it
again to stop scanning and retain playing the song currently selected.
E. In CDP mode, press 3RPT button to play the current track repeatedly. Press it again to
cancel this mode.
F. In CDP mode, press 4RDM button to play the track in random order. Press it again to
cancel this mode.
G.In mp3 mode ,press the 5-10/6+10 buttton to select back 10 tracks or next 10 tracks.

16.MUTE BUTTON

Press it to eliminate the sound immediately.
17.DISP BUTTON
Press DSP button immediately to recall time display, then press and hold this button for
three seconds until the time is blinking. And press VOL+ button to adjust hour or VOL-
button to adjust minutes.
18.APS/SEARCH BUTTON
IN RADIO MODE:
When short pressing, the radio searches for each preset station.
When the field strength level is more than the threshold level of stop level, the
radio is holding at that preset number for few secretary with releasing mute, and
than searches again. In FM band, FM 1, FM 2 and FM 3 is checked one at a time.
When long pressing (more than 1 second),the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished.
And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.
or for more than 2 seconds you can
or ,you can have manual search channel.
or button to choose the following track or the
or button for several seconds to fast forward
or button once to choose the next or previous
3