Ec1 - Curtis G4TP2S10A3500 User Manual

G4 thermopro series. 1.5 gallon coffe brewing system
Hide thumbs Also See for G4TP2S10A3500:
Table of Contents

Advertisement

ERROR CODES
Warning Messages - Allows Brewer to Continue Brewing
MESSAGE DISPLAY
Maintenance Required
Low Water Flow
Warning
Internal Error 2
Error Messages - Brewer Will Stop Brewing
MESSAGE DISPLAY
Water Level Error
Sensor Error
Over Temp. Error*
Internal Error 1
* This error is disabled on CGC and Seraphim models.
WARNING DESCRIPTION
Maintenance Required
Low Water Flow
UPM-UCM have a mismatch
in their settings.
ERROR DESCRIPTION
Open Sensor
Excess Temperature
UPM-UCM Communication
CAUSE
Brew count "Gallons Since Reset" exceeds programmed
preventative maintenance period.
If the Inlet valve remains on longer than XX seconds (during the
brew cycle only) and repeats TWICE during that brew cycle. It shall
will re-appear. XX = Alpha 20 secs; Gem/TP Twin 40 secs; Gem/TP
Single 30 secs.
needed.
CAUSE
The water inlet valve has either been open for more than 10 minutes
Break in the temperature thermistor circuit or short circuit.
The sensor is reading that temperature in the heating tank has risen
Break in the UPM-UCM communication circuit.

EC1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents