Laser Cautions - PSC PowerScan RF User Manual

NOTE

Laser Cautions

User's Guide
Figure 11 above shows label placement ONLY. For
actual regulatory, patent and other applicable infor-
mation, view the labels on the product itself, or call
your nearest sales or service representative.
The PowerScan RF bar code scanner is certified in the U.S. to conform
to the requirements of DHHS/CDRH 21CFR Subchapter J for Class II laser
products (SR and LR) and Class IIIa (XLR). Class II and IIIa products are
not considered to be hazardous. The scanner contains a Visible Laser
Diode (VLD) at a wavelength of 650-670 nanometers and is designed so
that there can be no human access to harmful levels of laser light dur-
ing normal operation, user maintenance, or during prescribed service
operations.
In the unlikely event that a bright laser spot is expe-
rienced rather than a scan line, do not stare into the
beam or attempt to repair the unit. Discontinue
operation and return the unit to your dealer. Note
that when using Marker Beam Mode, a single aim-
CAUTION
ing dot is projected momentarily preceding a scan
line and is not considered a malfunction.
Do not open or otherwise service any components
in the optics cavity. Opening or servicing any part
of the optics cavity by unauthorized personnel may
violate laser safety regulations. The optics system
CAUTION
is a factory only repair item.
The PowerScan
in conjunction with the PSC Base Station, Model:
PowerScan RF Base Station.
NOTE
®
RF scanner is required to be used
21