Replacing Windshield/Rear Window Wiper Blade Insert; Roof Rack - Mercedes-Benz ML 320 Operator's Manual

Instruments
Operation
and controls

Roof rack

Replacing windshield/rear window
wiper blade insert
For removal and installation of wiper blade
see page 228.
Place wiper blade on firm support. Press down both tabs
and slide (direction of arrow) the wipper blade insert out
of the retainer claws.
Installation:
Slide wiper blade insert into retainer claws until tabs
are engaged.
Instrument
Driving
cluster display
229
Practical hints Car care
Roof rack
Use only those roof racks approved by Mercedes-Benz.
Follow manufacturer's installation instructions. They
mount to the roof rails and do not require additional
supports (e.g. suction cups or legs). Such supports may
lead to marring of the paint or denting the roof. For
further information inquire at your Mercedes-Benz
Light Truck Center.
Take into consideration that when the roof rack is
loaded, the handling characteristics are different from
those when operating the vehicles without the roof rack
loaded.
Technical
Index
data