Mercedes-Benz ML 320 Operator's Manual page 112

Folding right seat bench section for access to rear
compartment area:
Slide seat bench section forward.
1.
Push head restraint fully down and tilt it forward,
2.
Pull lock button (2) up, and fold seat back forward.
3.
Remove respective cargo floor plate, see page 112.
4.
Pull lever (6) up, and fold seat bench section
5.
forward.
Interior equipment
Instruments
Operation
and controls
109
Instrument
Driving
cluster display
Resetting seat bench:
1. Pull down on seat bench section until it locks into
place.
2. Pull lock button (2) up, and unfold seat back to
upright position. Check for secure locking by
pushing and pulling on the backrest. The backrest
lock indicators at the lock buttons (2) are not visible
in locked position.
3. Pull up and adjust head restraint.
Caution!
Do not remove restraints except when mounting seat covers
For removal refer to page 42. Whenever restraints have been
removed be sure to reinstall them before driving.
Practical hints Car care
Technical
Index
data