Mercedes-Benz ML 320 Operator's Manual page 158

Instruments
Operation
and controls
Driving instructions
When towing a trailer, check occasionally to be sure that
the load is secure, and that lighting and trailer brakes
(if so equipped) are functioning properly.
Always secure items in the trailer to prevent load shifts
while driving.
Take into consideration that when towing a trailer, the
handling characteristics are different and less stable
from those when operating the vehicle without a trailer.
It is important to avoid sudden maneuvers.
The vehicle and trailer combination is heavier, and
therefore is limited in acceleration and climbing ability,
and requires longer stopping distances. It is more prone
to reacting to side wind gusts, and requires more
sensitive steering input.
In order to gain skill and an understanding of the
vehicle's behavior, you should practice turning,
stopping and backing up in an area which is free from
traffic.
If possible, do not brake abruptly, but rather engage the
brake slightly at first to permit the trailer to activate its
brake. Then increase the braking force.
Instrument
Driving
cluster display
155
Practical hints Car care
Caution!
If the trailer should begin to sway, reduce the vehicle's
speed and use the brake controller by hand to straighten
out the vehicle and trailer. In no case should you
attempt to straighten out the tow vehicle and trailer by
increasing the speed or oversteering and stepping on
the brakes.
If the transmission hunts between gears on inclines,
manually shift to a lower gear (select "4", "3", "2"
or "1"). A lower gear and reduction of speed reduces the
chance of engine overloading and/ or overheating.
At very steep inclines, not manageable with selector
lever in position "1", switch transfer case to LOW
RANGE, see page 169 for instructions on how to engage
LOW RANGE.
When going down a long hill, shift into a lower gear and
use the engine's braking effect. Avoid riding the brakes,
thus overheating the vehicle and trailer brakes.
Technical
Index
data