Sony ICD-PX470 Help Manual page 40

When you are finished with the last item, press
Press or to select "Next," and then press
4
The setting window for turning the beep sound on or off is displayed.
Press or to select "ON" or "OFF" to turn on or off the beep sound, and then press
5
When the initial settings finish, the completion message and then the HOME menu appears.
Note
The default date display format depends on the country or region of your purchase.
The clock may tell the time either in 12-Hour format with "AM" or "PM" or in the 24-Hour format, depending on the selected clock display format
(Time Display) on the Settings menu. In addition, the default clock display format depends on the country or region of your purchase.
The number of language options you can select and the default setting differ depending on the country or region of your purchase.
Hint
You can change the clock setting and the beep sound setting at any time later by selecting "
menu.
Once you have removed the batteries from the compartment and inserted them back in or you have replaced the batteries with new ones, the Set
Date/Time screen appears on the display widow. On this screen, you see the date and time of the last operation you made with your IC recorder
before you removed the batteries. Be sure to change the date and time to the current ones.
When you are finished with the initial settings, placing your IC recorder into the HOLD state displays the current date and time on the display
window.
to apply the settings to the clock.
.
.
Settings" - "Common Settings" from the HOME
27