Turning On/Off The Lamp - Proxima Multimedia LCD Projectors User Manual

Turning On/Off the Lamp

When you first turn on the projector, the lamp will be on. To
turn the Desktop Projector's lamp off, press the LAMP key on the
Control Panel or remote control. Pressing the LAMP key again
will turn the lamp on. The lamp turns on slowly to prolong lamp
life.
Brightness
Volume
Video
Figure 2-16
The LAMP key
Turning the lamp off does not cut power to the
Note:
projector. The fans will still operate. You must move the AC
POWER switch to the OFF position to completely power down
the projector.
Chapter 2 • Detailed Setup
Sync
Lamp
Menu/
User's Guide • 2–21