Horizontal Scanning; Vertical Scanning; Power Input Connection - Philips 273E3LHSB/00 Service Manual

3.3.2 Factory Preset Modes (15 modes)
Factory modes and preset modes are defined in the enclosed timing table file
Video timing mode (internal firmware support)
60Hz: 480i/480p/720p/1080i/1080p
50Hz: 576i/576p/720p/1080i/1080p
3.3.3 Software control functions via OSD / control adjustable functions:
ITEM
1 OSD DEFINITIONS
2 OSD LANGUAGES
3 OSD TREE
4 POWER ON LOGO

1.4 Horizontal scanning

Sync polarity
Scanning frequency
HDMI Support Video timing as 3.1 -1

1.5 Vertical scanning

Sync polarity
Scanning frequency
HDMI Support Video timing as 3.1 -1 (24Hz, 25Hz, 30H, 50Hz, 60Hz)

1.6 Power input connection

Power cord length
Power cord type
: Positive or Negative
: 30 - 83 KHz
: Positive or Negative
: 56 - 76 Hz
: 1.5 M
: 3 leads power cord with protective earth plug.
Meridian 3
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
9 LANGUAGES
Power On Logo: Power On
Show up Philips logo 3 seconds
Change to input signal.
This picture is reference only.
The official drawing will send out
by PM.
71