Setting your logo
The logo can be your company, division or name.
Press (MENU).
1
Display:
Press (#), then (0) (2).
2
Press (START/SET/COPY).
3
4
Enter your logo, up to 30 characters, by using the
dial keypad. See next page for details.
Example: Bill
1. Press (2) twice.
2. Press (4) six times.
3. Press (5) six times.
4. Press
to move the
cursor to the next space and press (5) six times.
Press (START/SET/COPY).
5
Press (MENU).
6
To correct a mistake
or
to move the cursor to the
≥Press
incorrect character, then make the correction.
To delete a character
≥Move the cursor to the character you want to delete
and press (STOP).
1.SYSTEM SET UP
YOUR LOGO
LOGO=
LOGO=B
Cursor
LOGO=Bi
LOGO=Bil
LOGO=Bill
SETUP ITEM [
]
/
INSERT
2
3
1
4
5
6
7
8
9
0
STOP
(Delete)
START/SET/COPY
Note:
≥You can enter your logo by rotating
(JOG\DIAL) (see next page).
To insert a character
1. Press
or
to move the cursor to the
position to the right of where you want to
insert the character.
2. Press (INSERT) (One-Touch Dial key 2) to
insert a space and enter the character.
HYPHEN
MENU
JOG DIAL
13