Before First Use - AEG L 99695 HWD User Manual

20 www.aeg.com
function, put the stain remover into
compartment
The programme duration
increases. This function is
not available with a
temperature lower than
40° C.
8.12 T./min
Touch button T./min to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
for the set programme.

9. BEFORE FIRST USE

1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Clock setting
After you set the language, the display
tells to set the clock. The hour digits
flash.
1. Turn the programme knob to change
the hour.
2. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
The minute digits flash.
3. Turn the programme knob to change
the minutes.
4. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
9.2 Change the time of the
day after the first activation
1. Touch the buttonExtra Spoelen -
Rinçage+ and the button Tijd
Besparen - Gain de Temps at the
same time for some seconds.
The hour digits flash.
.
• Deactivate the spin phase ( 'No spin'
function).
• Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
8.13 Temp.°C
Touch this button to change the default
temperature.
Symbols and
2. Turn the programme knob to change
the hour.
3. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
9.3 Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
1. Turn the programme knob to set the
desired language.
2. When the display shows the
necessary language touch Start/
Pauze - Départ/Pause button to
confirm the selection.
9.4 Change the language after
the first activation
1. Touch button T./min and button
Vlekken - Taches/Voorwas -
Prélavage at the same time for some
seconds.
2. When the display shows the
language set, turn the programme
knob to set the new language.
3. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
= cold water